Setting The Type Of The Video Input Signal - Sony JumboTron JTC-C200 Operating Instructions Manual

Setting the type of the video input signal

Select the type of the video signal to be input from the VCR, video camera
or other image output equipment.
F1 (COMPOSITE), F2 (COMPONENT),
and F3 (RGB) buttons
1
When the display window shows the normal display, press the F5
(NEXT) button repeatedly until the SWITCHER-1 display appears.
The currently selected input signal and the input signals which you can
select using the function buttons are shown on the display.
Currently selected input signal
2
Press the F1, F2 or F3 button to select the type of the input signal.
Press
F1
F2
F3
F5 (NEXT) button
SWITCHER-1
1- COMPOSITE
3- RGB
[1 ] [2 ] [3
To select
COMPOSITE (composite video) signal
COMPONENT (component) signal
RGB signal
Input signals selectable
using the function buttons
COMPOSITE
2- COMPONENT
] [4 ] [NEXT]
21
Operation