Specifications - Sony JumboTron JTC-C200 Operating Instructions Manual

Specifications

JTC-P200 ICU
General
Power requirements
AC 100 – 240 V, 50/60 Hz, 1.4 A
Power consumption
140 W (max.)
482 × 177 × 486 mm (w/h/d)
Dimensions
(19 × 7 × 19
Mass Approx.15.8 kg (34 lb 13 oz)
Operating conditions
Temperature: 0
113 °F)
Humidity: 30% to 70% (no
condensation)
Signal cable length 100 m (328 feet) max.
Input/output
Input
INPUT-1 Composite video input: BNC
connector (1), 1 Vp-p
sync negative, 75 ohms
terminated
Analog RGB/component inputs:
BNC connector (5)
R/R-Y: 0.7 Vp-p ± 2 dB, positive,
75 ohms terminated
G/Y: 0.7 Vp-p ± 2 dB, positive,
75 ohms terminated
G with sync/Y: 1 Vp-p
sync negative, 75 ohms
terminated
B/B-Y: 0.7 Vp-p ± 2 dB, positive,
75 ohms terminated
HD/COMP:
Composite sync input:
1 – 3.5 Vp-p, sync positive/
negative, 75 ohms terminated
Horizontal sync input:
1 – 3.5 Vp-p, sync positive/
negative, 75 ohms terminated
VD:
Vertical sync input: 1 – 3.5 Vp-p,
sync positive/negative, 75 ohms
terminated
32
Others
1
/ inches)
4
°C to 45 °C (32 °F to
± 2 dB,
± 2 dB,
INPUT-2 Analog RGB inputs: BNC
connector (5)
R: 0.7 Vp-p ± 2 dB, positive, 75
ohms, terminated
G: 0.7 Vp-p ± 2 dB, positive, 75
ohms terminated
G with sync: 1 Vp-p
negative, 75 ohms terminated
B: 0.7 Vp-p ± 2 dB, positive, 75
ohms terminated
HD/COMP:
Composite sync input:
1 – 3.5 Vp-p, sync positive/
negative, 75 ohms terminated
Horizontal sync input:
1 – 3.5 Vp-p, sync positive/
negative, 75 ohms terminated
VD:
Vertical sync input: 1 – 3.5 Vp-p,
sync positive/negative, 75 ohms
terminated
Output SIGNAL OUT: High-density D-sub
15-pin (48)
VIDEO OUT: BNC connector (1),
1 Vp-p ± 2 dB, sync negative, 75
ohms terminated
MONITOR OUT: BNC connector
(1), 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated
Control CONTROL 1/LS, CONTROL 2,
CONTROL 3, CONTROL 4:
D-sub 15-pin for RS-422 (4)
EXTERNAL CONTROL: D-sub
15-pin (1)
Supplied accessories
Rail mounting bracket (4)
AC power cord (3)
Operation Guide (1)
± 2 dB, sync