Assembly; Mounting The Spot Light - ALDI Lightway BMSL1232 User Manual

Assembly

Assembly
Risk of electric shock!
Improper installation may result in an electric
shock.
− Ensure that there are no cables or other
electrical lines behind the location where
the spotlight is attached.
To avoid triggering the spotlight unintentionally, the
spotlight must be fitted firmly. If the spotlight moves,
this has the same effect as moving heat sources in the
sensor area.

Mounting the spot light

1. Choose a suitable surface for installation (see chapter
"Choosing an installation location").
2. Remove the rear panel
both fixing screws
3. Hold the rear panel on the installation surface and mark
both locations for fastening. Use a spirit level if necessary.
4. Choose mounting materials which are suitable for the
installation surface. The supplied screws
are suitable for concrete and brickwork.
5. Screw the rear panel into the locations for fastening according
to the properties of the installation surface. Do not apply
excessive force in the process.
18
WARNING!
6
.
2
from the spotlight by unscrewing
13
and dowels
14