Sherman Workshop MIG 200M User Manual page 12

13. INSTRUCTION STORAGE AND TRANSPORT
The device should be stored at -10 ° C to + 40 ° C and relative humidity 80% free of corrosive fumes and dusts. Transportation of packaged devices
should be covered means of transport. For transport the packaged unit must be secured against slipping and ensure the correct position.
14. COMPLETE SPECIFICATION
1. Source
2. Torch
3. Earth cable with a clamp
4. wire electrode
5. The guide roller 0.8 / 1,0Al
6. The gas hose
7. Manual
8. Packaging
13. Warranty
Guarantee granted for a period of 12 months for business entities but excluding claims related to or guarantee of 24 months for the
consumer from the date of sale.
The guarantee will be respected by the advertiser after the presentation of proof of purchase (invoice or receipt) and warranty card inscribed
with the product name, serial number, date of sale and point of sale bearing the stamp.
In the case of warranty repair should contact TECWELD, which will arrange the reception device by courier. Consignments sent in a
different way at the expense of the company TECWELD will not be accepted!
Welder should be provided with the welding torch. Complaints device without the torch will not be considered.
The device transmitted to the complaint must be packed in the original carton, and protected by Styrofoam original fittings. TECWELD
company is not liable for damage caused by a welder during transport.
For shipment must be accompanied by a completed Entry Form damage, which can be downloaded from the website For shipment must be accompanied by a completed Entry Form damage, which can be downloaded from the website
The user who wishes to discard this product, it is obliged to return waste electrical and electronic equipment to a used equipment collection
point. Collection points are conducted, among others, by wholesalers and retailers of equipment and the municipal organizational units
engaged in waste collection.
These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and electronic equipment and to
ensure an adequate level of collection, recovery and recycling of used equipment. Proper implementation of these duties is important especially
when the waste equipment contains hazardous components which have a particularly negative impact on the environment and human health.
TECWELD Peter Polak
41-943 Piekary Slaskie Street. Emerald 21/3/6
If you wish to discard this product, do not throw it with general household waste. According to the
WEEE Directive (Directive 2002/96 / EC) in force in the European Union for used electrical and
electronic equipment must be used methods of utilization.
In Poland, in accordance with the provisions of the Act of July 1, 2005. Waste electrical and
electronic equipment is prohibited to place together with other wastes of used equipment marked
with crossed out wheeled bin symbol.
1 piece.
1 piece.
1 piece.
1 piece.
1 piece.
1 piece.
1 piece.
1 piece.
branch:
41-909 Bytom ul. 3 Cross Tel. (+48) 32 38-69-428, fax (+48) 32
38-69-434 e-mail: info@tecweld.pl www.tecweld.pl
12
http://tecweld.pl/downloads/karta-zglosz http://tecweld.pl/downloads/karta-zglosz