Advertisement
JC MACHINERY & TOOLS INC.
2. The description of Automatic Tape Welder
30. Tape fixed set
31. Tape fixed cover
32. Tape circular disc
v.
How to change Overlap Banner Welder to Tape Welder
1. Loosen belt wheel fix nut( 38 ), take down belt wheel set ( 39 )、circular silica
belt ( 27 );
2. Loosen pressure roller fixed screw ( 28 ), take down gasket ( 42 ) and overlap
Pressure roller ( 29 ), assemble the drive shaft coupling cover ( 44 )、tape
pressure roller ( 36 )、pressure roller stopper ( 35 ) and inner hexagon screw
( 43 ) in proper cord;
3. Loosen hot air nozzle fixed screw ( 41 ), take down overlap hot air nozzle
( 25 ), and then replace into tape hot air nozzle ( 37 ) ;
4. Loosen guide wheel nut ( 9 ), take down guide wheel shaft sleeve ( 10 ) and
guide wheel set ( 40 ), reassemble guide wheel set as the below pictures
show;
5. Assemble tape limit set ( 34 ) and tape fixed set ( 30 ).
33. Disc Nut
34. Tape limit set
35. Pressure roller stopper
Quality We Trust
36.
Tape pressure roller
37.
Tape hot air nozzle
3
Advertisement
