Table of Contents
Advertisement
It is very important to set the correct
temperature for storing food in the ap-
pliance. Bacteria will cause food which
is not stored at the correct temperature
to deteriorate rapidly. Temperature influ-
ences the growth rate of these bacteria.
Reducing the temperature reduces their
growth rate.
The temperature in the appliance will
rise:
– The more often the door is opened
and the longer it is kept open
– The more food that is stored in it
– The warmer the food is which is be-
ing put into it
– The higher the ambient temperature
surrounding it. The appliance is de-
signed for use within specific ambi-
ent temperatures (climate range). Do
not use in ambient temperatures for
which it is not designed.
... in the refrigerator section
and in the MasterFresh zone
We recommend a temperature of 39°F
(4°C) in the refrigerator section.
We recommend a temperature of 32°F
(0°C) in the dry compartment of the
MasterFresh zone.
However, if you would like it to be
warmer or colder, e.g., when storing
fish, you can adjust the temperature in
the dry compartment.
The correct temperature
Automatic cold air circulation
(DynaCool)
The fan automatically turns on when the
cooling system for the refrigerator sec-
tion turns on. It distributes the tempera-
ture in the refrigerator section to all ar-
eas evenly so that all the food inside will
be chilled to about the same degree.
Setting the temperature
Touch the symbol for setting the
temperature.
The previously set temperature will ap-
pear.
Set the temperature you want with
the and sensor controls. Keep-
ing your finger on the sensor control
changes the temperature continu-
ously.
Confirm the temperature setting with
OK or wait approx. 8 seconds after
the last touch of the sensor. This tem-
perature will be automatically
adopted.
Tip: The newly set temperature can also
be confirmed and adopted by closing
the appliance door.
The temperature display always shows
the required temperature.
If you have adjusted the temperature,
wait for approximately 6 hours if the
appliance is not very full and for ap-
proximately 24 hours if the appliance
is full before checking the temperature
display. It will take this long for an accu-
rate reading to be given.
81
Hide quick links:
Advertisement
Table of Contents
