Contact Us - LifeView FlyTV Platinum User Manual

With some motherboards USB and AGP are "internally connected",
should this be the case the USB controller on the motherboard has to be
enabled for the AGP-mainboard drivers to work correctly.
8. Use USB IRQ (enabled, disabled)
If this option can be found in the bios settings, enable the USB IRQ to
fully activate the USB controller.
9. CPU to PCI Write Buffer (enabled, disabled) should the TVR crash during
operation, test if switching this option helps
Why I don't hear any sound, but see a TV picture?
Q:
A: First make sure that the audio out from the FlyTV Platinum is connected to the
line in on your sound card.
Next, make sure that your Windows mixer settings are set correctly. You can
check for this by double-clicking on the speaker icon next to the clock in the
bottom right hand corner of the screen. Make sure all the appropriate levels are
set about 3/4 the way to the top. You can also click on Options - Properties -
Recording and then set these levels the same.
You may have to recapture your video.
Q: What can I do, when the audio is sometimes disappearing after 1 minute?
A: If you have Windows Messenger running on the task bar, please disable it or
close it. You should update Messenger with the last version available.
The problem can also happen with some anti-virus software
6.2

Contact Us

If you have attempted to resolve any FlyTV Platinum problems and still require
assistance, contact us by e-mail at: tech@lifeview.com. Alternately, you may access
our technical support page on our website
updates will be posted and available for download.
http://www.lifeview.com
Technical Support
.
where driver
25