Radio Restart; Range Test - Rentokil Rat Riddance Connect Instruction Manual

Using the Interface (Continued)

5. Radio Restart

To force the radio to restart the connection process to the control
panel, hold the magnet over the device for between 5 and 10 seconds.
Only remove the magnet when the fl ashing
status LED has changed from blue to yellow.

6. Range Test

To assess network signal strength and the number of control
panels required for a site, a Range Test can be performed.
Hold the magnet over the device
for 10 seconds, until the status
LED turns red
LED IDENTIFIER:
Range test mode will automatically exit after 1 hour.
To exit range test mode manually, hold the service key over the device. The unit will
then restart and reconnect to the control panel and allow the device to be armed.
Flashes Purple
every 3 seconds
Flashes Red
every 3 seconds
Flashes Yellow
every 3 seconds
Flashes Blue
every 3 seconds
14
Unit is trying to make a connection
No signal
Weak Signal
Good Signal
5 - 10 Secs
10 Secs +