Installing The Batteries - Rentokil Rat Riddance Connect Instruction Manual

5. Installing the Batteries

A
Ensure the trap is disarmed, then remove
Main Assembly from shoe using RI Service
Key and remove the battery door.
C
LED Start-Up Sequence:
Upon inserting the batteries, the startup sequence will automatically begin.
D
Slide Module back onto the base
Note: The module can be fitted back on to the trap, either before or after the
batteries are refitted. Once the batteries are fitted, the module will automatically start.
Click
LED IDENTIFIER:
Continuous White Signal:
Red flashing Signal:
Purple flashing Signal:
Blue flashing Signal:
B
Ensure the correct
battery pole orientation
Fit 3x AAA batteries and replace the
battery door, check the LED's status.
Code:
EXPLANATION:
Unit switched on
Seaching for Control Panel connection
Unit is trying to make a connection
Connection has been made
E
Click
Ensure the Module locks into place
11
Status LED
Connection LED