Hardware tab, and then click Device Manager. )
Right click the serial port, select properties, you can see the information of serial port
properties in General, Port Setting, Driver, Details (generally, configuring is not necessarily,
cause USB4485 can
Select Advanced settings for COM, you can redistribute the port.(If you click the Restore
Defaults, all the settings will return to Factory default settings)
NOTE:
In use: the port is used.
erial port properties, must select scan the hardware again or reinsert USB
After change s
cable, otherwise, the port is not displayed.
automatically detect data
).
Page 9 of 9
USB4485 User Manual