Download Print this page
3onedata USB4485 Quick Installation Manual

3onedata USB4485 Quick Installation Manual

Interface converter
Hide thumbs Also See for USB4485:

Advertisement

Quick Links

USB4485 Interface Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Shenzhen
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the device for the first time.
1.
Interface converter
2.
5VDC Power adapter
3.
CD
4
Quick installation guide
5.
Warranty card
6.
Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is an interface converter for data exchange
between USB and RS-485/422, model is USB4485 (1 USB
port + 4 RS-485/422 serial ports + 1 5VDC power supply).
【Panel Design】
Front View
Rear View
Top view
Nanshan
District,
1.
USB Type-B (Female)
2.
Serial port 4 data receiving&transmitting indicator
3.
Serial port 3 data receiving&transmitting indicator
4.
Serial port 2 data receiving&transmitting indicator
5.
Serial port 1 data receiving&transmitting indicator
6.
Power supply indicator PWR
7.
DB9 RS-485/422 terminal blocks (COM1-COM4)
8.
Power input terminal (5VDC)
【Mounting Dimension】
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
Notice Before Power on:
Power ON operation: First insert the power supply
terminal block into the device power supply interface,
then plug the power supply plug contact and power on.
Power OFF operation: First, remove the power plug,
then remove the wiring section of terminal block. Please
pay attention to the above operation sequence.
【Power Supply Connection】
USB Power Input
The front panel of the device provides 1 USB storage port,
adopting Type-B connection mode.

Advertisement

loading

Summary of Contents for 3onedata USB4485

  • Page 1 The product is an interface converter for data exchange The front panel of the device provides 1 USB storage port, between USB and RS-485/422, model is USB4485 (1 USB adopting Type-B connection mode. port + 4 RS-485/422 serial ports + 1 5VDC power supply).
  • Page 2 As shown in the figure, PIN 1 supports 5VDC power transmitted through serial port. Working humidity 5%~95%(no condensation) input. Protection grade IP30(metal shell) Serial port is transmitting data abnormally or transmitting a large amount of data. 5VDC power supply input ...