3onedata USB8232I Quick Installation Manual

USB8232I Interface Converter
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the device for the first time.
1. Interface converter 2.
3. CD 4.
5. Certification 6.
7. AM USB head / BM USB head converter line
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is a data exchange interface converter between
USB and RS-232, model is USB8232I (1 USB port +8 isolated
RS-232 serial port +1 9VDC power supply).
【Panel Design】
Front view

Rear view

Bottom view

Left view, right view

Quick installation
guide
Warranty card
Power adapter
1. DC power input terminal block
2. B type USB female head interface
3. Serial port COM1-COM8 transmission data indicators
4. Serial port COM1-COM8 receiving data indicators
5. Power indicator
6. Serial port COM1-COM8
【Mounting Dimension】
Unit: mm
Notice before mounting:
Don't place or install the device in area near water or

moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power

supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;

please don't directly contact to avoid scalding.
Notice before power on:
Power ON operation: First insert the power supply

terminal block into the device power supply interface,
and then plug the power supply plug contact and power
on.
Power OFF operation: First, remove the power plug,
