Energy Storage Control - Huawei SUN2000L2KTL User Manual

SUN2000L-(2KTL-5KTL)
User Manual
Parameter
----End

6.4.2 Energy Storage Control

Forcible Charge/Discharge
Step 1 On the Home screen, choose Device maintenance > Energy control > Energy storage
control > Forcible charge/discharge and perform operations as required.
Figure 6-10 Forcible charge/discharge
Table 6-4 Description of forced charge/discharge parameters
Parameter
Charge/discharge power
Forced charge/discharge
power (kW)
Issue 05 (2019-06-06)
Description
meter, the output power of
the SUN2000L is supplied
only to the local load, but
not the power grid.
If this parameter is set to
Power-limited Grid
Connected and the
SUN2000L is connected to a
power meter, the
SUN2000L supplies power
limited based on the setting
of Grid-tied Point Power
to the power grid.
Description
The battery is charging or
discharging when the
command is set.
Specifies the forced
charge/discharge power.
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
Value Range
Value Range
 Stop

Charge
 Discharge

Charge: [0, Maximum
charge power]
 Discharge: [0, Maximum
67