Bissell 5288 User Manual page 6

H
ow to use your Flip-Ease
Dry Vac
1. Attach the Gentle Clean™ MicroFiber pad
onto the base of the unit. Begin by attaching
the pad onto the Velcro on one side of the
unit, wrapping it under the foot and
attaching on the other side
Tip: If the MicroFiber covers the vacuum
suction path, the unit will not suction.
Suction Path
Microfiber Pad
2. Turn the unit on.
3. With the Dry Vac side of the unit facing forward,
begin cleaning. You will see dry dirt, crumbs and
debris being collected in the Dirty Tank.
4. Check the filter frequently. If you see hair
and fuzzy debris collecting on the filter,
remove the dirty tank and dirty tank lid to
clean the filter.
To clean the filter, gently tap it on the edge
of the trash can, brushing off anything that
may be sticking to the filter. The filter can
also be rinsed with warm water. Let air dry
before inserting back into the unit.
6
w w w . b i s s e l l . c o m
ug603-6913_5288_606.indd 6 ug603-6913_5288_606.indd 6
Underside of foot
Tip:
The MicroFiber pad should be
placed in the areas directed.
Covering the vacuum suction path
will stop all suction.
1 1a
2
3
4
8 0 0 . 2 3 7 . 7 6 9 1
6/20/06 9:12:26 AM 6/20/06 9:12:26 AM