Subscribe to Our Youtube Channel
Related Manuals for Award E-295
Summary of Contents for Award E-295
- Page 1 E-295 CEILING HOOD INSTALLATION GUIDE INTERNAL MOTOR VERSION (“A” Fitting System) EXTERNAL MOTOR VERSION (“B” Fitting System)
- Page 3 E-295 CEILING HOOD INSTALLATION GUIDE 1.– INITIAL CKECKING LIST, MINIMUM DISTANCE INTERNAL MOTOR VERSION EXTERNAL MOTOR VERSION The minimum distance between the rough cei- The minimum distance between the rough ling and the suspended ceiling must be 196mm, and ceiling and the suspended ceiling must be 296mm,...
- Page 4 E-295 CEILING HOOD INSTALLATION GUIDE 2.2- This ceiling hood model is designed so that it is easy to swap the motor air exhaust duct position. If required, please follow the following instructions: 1. Open the panel of the ceiling hood.
- Page 5 E-295 CEILING HOOD INSTALLATION GUIDE 3.– MAKING THE OPENING If the ceiling hood is going to be fitted between the joists, the air exhaust duct position can be placed on the short side, only, and the opening dimensions will be as detailed in A OPTION, only.
- Page 6 E-295 CEILING HOOD INSTALLATION GUIDE threaded rods length must be the height between the rough ceiling and the suspended ceiling (the length “L” inserted in the rough ceiling is not included) minus 65mm, according to the following image: 36 mm - ceiling hood thickness.
- Page 7 E-295 CEILING HOOD INSTALLATION GUIDE To wear the holes in the ceiling, please select the right fitting option: Option A - Fitting the ceiling hood with M8 size threaded rods. Option B - Fitting between the joists. Page 6...
- Page 8 E-295 CEILING HOOD INSTALLATION GUIDE 5.– PREPARING THE CEILING HOOD TO BE FITTED The ceiling hood is provided with the light pannels detached. A hook shaped or nipper shaped tool is supplied with the provided accessories, to be used to detach the light panels in case they are attached, if necessary.
- Page 9 E-295 CEILING HOOD INSTALLATION GUIDE 6.– RAISING, FITTING AND ELECTRICAL CONNECTION OPTION A - FITTING THE CEILING HOOD WITH M8 SIZE THREADED RODS. Place the threaded rods into the holes made previously in the rough ceiling. Insert the M8 size brackets, the tab...
- Page 10 E-295 CEILING HOOD INSTALLATION GUIDE OPTION B - FITTING BETWEEN THE JOISTS. Fit the hood in the opening so that the edge of the hood must be completely aligned with the suspended ceiling. Fix it to the wood rawlplug previously drilled.
- Page 11 E-295 CEILING HOOD INSTALLATION GUIDE ELECTRICAL CONEXIÓN: (This operation has to be carried out by a specialized technician). WARNING! Before performing visual inspections, tests, or maintenance on this equip- ment, disconnect all sources of electric power. Assume that all circuits are live until they have been completely de-energized, tested, and tagged.
- Page 12 E-295 CEILING HOOD INSTALLATION GUIDE Ø150 mm hood air outlet must be connected to the air exhaust duct. A shape adaptor will be required to attach the rectangular outlet to an circular section air exhaust duct. REMARK! Try to seal the junctions between the adaptor and the duct, to avoid having any air loss. Finally, use aluminium tape or plastic clamps to seal all the whole.
- Page 13 CEILING HOOD TURNING ON AND COMISSIONING * REMOTE CONTROL SYNCHRONISING Turn on the electrical circuit from the main electrical switchboard. Open the front panel and remove the filter to access the ON/OFF switch. Turn it on (please see the appropriate images, according to the hood motor version).
- Page 14 E-295 CEILING HOOD INSTALLATION GUIDE 7.– PLACE THE FILTER AND CLOSE THE FRONT PANEL Place the filters and close the front panel. Before placing the light panels, plug the connectors, adjust the light panels and press slightly to fit them .
- Page 16 Award Appliances (NZ) Limited E-mail: sales@award.co.nz www.awardappliances.co.nz...
Need help?
Do you have a question about the E-295 and is the answer not in the manual?
Questions and answers