Page 4
Do not attempt to modify this equipment. All repairs should be carried out by an Award authorized technician. To avoid risks, any alteration of the equipment is strictly forbidden so is the replacement of the power cable. When installing the range hood it needs to be installed no less than ...
Page 5
WARNINGS the equipment and the warranty will be cancelled accordingly). The use of the equipment on a fuel stove is not authorized (wood, coal,…). Frying under the equipment shall be constantly monitored since oils and fats being subjected to high temperatures may ignite. Do not flame under the hood.
- Earth connection is required by law If the power cable must be replaced, use a cable having identical characteristics to the original supplied by the manufacturer, suitable for the load and temperature. This is available from an Award authorized service agent.
Page 7
WARNINGS Important! The entire installation process is exclusively reserved for qualified workers, installers or authorized technical service. Before proceeding with the installation, make sure that all components are in perfect conditions. Otherwise, contact the vendor and do not proceed with the installation.
Page 9
INSTALLATION Procedure for fixing Dimensional Drawings Follow the directions of the template for drilling Fix the hood as shown in the scheme Connecting and fitting Before connecting the appliance, check the household installation. Appliance with prefitted power cable: The power cable must only be replaced by a trained after-sales engineer.
INSTRUCTIONS Command Switch SLD Three-speed suction switch Lighting switch Suction indicator light Halogen Lamps Replacement Disconnect the hood from the mains and wait a few minutes for the lamp to cool. Follow the instructions in the related design, using gloves. Filters Replacement ...
Need help?
Do you have a question about the PPS601 and is the answer not in the manual?
Questions and answers