Bunker Hill Security 64734 Owner's Manual & Safety Instructions page 7

SENS (Sensitivity)
The SENS Adjusting Knob sets the level of
sensitivity of the Motion Detector Head.
The Motion Detector Head is most sensitive
to movement across the detection zone,
rather than movement toward or away
from the Motion Detector Head.
Turn the SENS dial anywhere between
the minimum and maximum settings to
adjust the level of sensitivity needed.
Note: Sensitivity is affected by the ambient
air temperature. If it is hot outside, the sensor
may have difficulty detecting changes in
heat. In cold temperatures, the sensitivity is
increased and may need to be adjusted.
TIME (Light Duration)
The TIME Adjusting Knob sets how long
the Lamp will stay illuminated after motion
is no longer detected by the sensor.
Minimum Position
Turn the dial counterclockwise to
the minimum for the Lamp stay
illuminated for 10 seconds after
motion is no longer detected.
LUX (Light Level)
The LUX Adjusting Knob tells the sensor
the level of darkness that must be reached
before the Lamp illuminates.
Minimum Position
Turning the dial
counterclockwise to the
minimum setting lowers the
sensor level. The sensor will
only trigger the Lamp to
illuminate at dusk or when it is
dark out. This is the ideal
position for general evening and night operation.
Note: If the Security Light is not operating at night due to interference from a street light or other
interference, turn the LUX knob towards the maximum setting
between the minimum and maximum settings to achieve the desired level of sensitivity.
Item 64734 For technical questions, please call 1-888-866-5797.
Minimum Position
Turn the dial counterclockwise
to the minimum setting (-).
Ideal for hot summer
conditions or when nuisance
tripping is a problem. If the
light is activated by small
animals or rapid changes in
heat, reduce sensitivity by
turning the knob counterclockwise towards the
minimum setting.
Maximum Position
Turn the dial clockwise to the
maximum setting (+). Ideal for
cold winter conditions or to
maximize range.
Mid Range
Adjust the dial between the
Minimum and Maximum, to
choose any time between 10
and 100 seconds, for the Lamp
to stay illuminated after motion
is no longer detected.
Maximum Position
Turn the dial clockwise to the
maximum for the Lamp to stay
illuminated for 110 seconds after
motion is no longer detected.
Maximum Position
Turning the dial clockwise to
the maximum setting increases
the sensor level. The Lamp will
illuminate in most situations
ranging from dark to daylight.
. Adjust the dial as needed
Page 7