Maintenance - Bunker Hill Security 64734 Owner's Manual & Safety Instructions

Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the unit. Check for:
• leaking, swollen, or cracked battery,
• loose hardware,
• misalignment or binding of parts,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
Battery Removal and Disposal
1. The battery is located inside the Lamp assembly.
2. Turn the Lamp off and remove
the screws on the back.
3. Disconnect the battery and remove it from the Lamp.
Item 64734 For technical questions, please call 1-888-866-5797.
2. AFTER USE, wipe external surfaces
of the unit with clean cloth.
3. Keep Solar Panel free of dirt and debris to maintain
optimum efficiency in recharging the battery.
4. Contains Li-Ion battery. Battery must be
recycled or disposed of properly. Do not open,
crush, heat above 140°F or incinerate.
Page 9