Bunker Hill Security 64734 Owner's Manual & Safety Instructions page 8

Testing the Light
After the battery is charged and the control Knobs are set, walk slowly around the detection area.
The sensor detects infrared radiation given off by a person or animal. This triggers the Lamp to
illuminate. The light should go on in the area that you set up the Security Light to monitor.
Adjust the Knobs and sensor, then re-test until the unit functions as desired.
Repeat the test procedure as needed when weather and/or temperature changes.
Page 8 For technical questions, please call 1-888-866-5797. Item 64734