Table of Contents
Advertisement
T
roubleshooting guide
Problem
The display shows:
The display shows:
The display shows:
The display shows:
The display shows:
Possible Causes
• Control error.
• Water level is too high due to a
faulty water valve.
• The water level sensor is not
working correctly.
• Thermal overload protection
circuit in the motor has been
tripped.
• A power failure has occurred.
Solutions
• Unplug the washer and call for service.
• Close the water taps, unplug the washer, and
call for service.
• Close the water taps, unplug the washer, and
call for service.
• Allow the washer to stand for 30 minutes to
allow the motor to cool; then restart the cycle.
If the LE error code still appears, unplug the
washer and call for service.
• Restart the cycle.
31
Advertisement
Table of Contents
