Table of Contents
Advertisement
H
ow to use washer
The LCD display shows the settings,
estimated time remaining, options, and status
messages for your washer. When the washer
is turned on, the light in the display will
illuminate.
(1) STATUS/CYCLE DISPLAY
This portion of the display shows the
selected cycle, operating status, and
special messages. If a cycle has special
instructions, they will also be displayed in
this area.
(2) ESTIMATED TIME REMAINING
When the START/PAUSE button is
pressed, the washer automatically detects
the wash load (weight) and optimizes the
washing time, based on the selected cycle
and options. The display will then indicate
the estimated time remaining for the
selected wash cycle.
The cycle time displayed may appear much
NOTE
longer than that of a top-loading washer.
The displayed time is for the complete
cycle, rather than just the agitation portion
of the cycle, as is typically shown on a top-
loading washer.
(3) CYCLE COMPLETION INDICATOR
Shows how much of the current wash
cycle has been completed.
(4) DOOR LOCK INDICATOR
Indicates that the door is locked. The
washer door will lock while the washer is
operating. The door can be unlocked by
pressing the START/PAUSE button to stop
the washer.
If the temperature in the washer is too high,
NOTE
the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN cycle to drain
excess water. Do not try to force open the
door.
The Lcd Display
(3)
(1)
(5) CHILD LOCK INDICATOR
When CHILD LOCK is set, the Child Lock
indicator will appear and all buttons are
disabled except the ON/OFF button. This
prevents children from changing settings
while the washer is operating.
(6) SPINSENSE
This indicator shows that the washer has
been set for the EXTRA RINSE option.
(7) EXTRA RINSE INDICATOR
This indicator shows that the washer has
been set for the EXTRA RINSE option.
(8) WATER PLUS INDICATOR
This indicator shows that the washer has
been set for the WATER PLUS option.
(9) STAIN CYCLE INDICATOR
This indicator shows that the washer has
been set for the STAIN CYCLE option.
(10) PRE WASH INDICATOR
This indicator shows that the washer has
been set for the PRE WASH option.
(11) CYCLE SETTING INDICATORS
These indicators show the current cycle
settings for WASH/RINSE, SPIN
SPEED, SOIL LEVEL, and BEEPER. To
change these settings, press the
appropriate settings button.
(4)
(5) (6) (7)(8)(9) (10)
(11)
TM
INDICATOR
To protect your garments, not every
NOTE
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
(2)
15
Advertisement
Table of Contents
