LG WD13050SD Owner's Manual page 19

H ow to use washer
Your Steam Washer™ features several
additional cycle options to customize cycles to
meet your individual needs. Certain option
buttons also feature a special function (see the
following page for details) that can be activated
by pressing and holding that option button for 3
seconds.
To add cycle options to a cycle:
1⃞ Turn on the washer and turn the cycle
selector knob to select the desired cycle.
2⃞ Use the cycle setting buttons to adjust the
settings for that cycle.
3⃞ Press the cycle option button(s) for the
option you would like to add. The cycle
option buttons, except STEAM and
DELAY, will light when selected.
4⃞ Press the START/PAUSE button to start
the cycle. The washer will start
automatically.
To protect your garments, not every
NOTE
wash/rinse temperature, spin speed, soil level,
or option is available with every cycle. See the
Cycle Guide for details.
Steam
Use the STEAM button to
add steam to the cycle for
extra cleaning power and
improved efficiency. See
steam Cycles section for
additional details.
Not all cycles can be used with the steam
NOTE
option.
Special function buttons
Delay wash
Once you have selected the
cycle and other settings,
press this button to delay the
start of the wash cycle. Each
press of the button increases
the delay time by one hour, up to 19 hours.
Tub clean
A buildup of detergent
residue can occur in the
wash tub over time and can
lead to a mildewy or musty
smell. The TUB CLEAN
cycle is specially designed to remove this
buildup. The display will show a message to
add liquid bleach to the dispenser. After the
cycle has ended, open the door and allow the
drum interior to dry completely.
Do NOT use this cycle with clothes, and do
NOTE
NOT add detergent or fabric softener.
Rinse+spin
Select this option to rinse
and spin a load separately
from a regular cycle. This
can be helpful in preventing
fresh stains from setting in
fabrics.
To activate the Rinse+Spin cycle:
1⃞ Press the ON/OFF button to turn on the
washer.
2⃞ Press the RINSE+SPIN button.
3⃞ Press the START/PAUSE button.
19