Advertisement
SETUP MENU
R
M0 13.50
SETTINGS
FUNCTIONS
SETTINGS
FAN SPEED
BACK
SELECT
SETTINGS
FACTORY SETUP
BACK
SELECT
SETTINGS
MAINTENANCE
BACK
SELECT
SETTINGS
ERROR LIST
BACK
SELECT
SETTINGS
MENU LANGUAGE
BACK
SELECT
SETTINGS
WEEK CLOCK
BACK
SELECT
SETTINGS
TIME
BACK
SELECT
SETTINGS
SUMMER BYPASS
BACK
SELECT
SETTINGS
CO2 AND %RH
BACK
SELECT
SETTINGS
TEMPERATURES
BACK
SELECT
SETTINGS
BOOSTING
BACK
SELECT
SETTINGS
PRESSURE COMP.
BACK
SELECT
Fan speed adjustment 1....5
Maintenance interval and reset
Display sensor and overheating faults, temperature deviations, filter exchange and starts
Fault list reset
Selecting language suomi, svenska, english or eesti
Air exchange can be reduced/increased during selected time periods.
5 different periods can be programmed. Each time period can be set for one or several weekdays.
In office-mode, the unit stops for the period out of selection and display reads standby.
Weekday and clock selection
Operating the summer bypass. The user of the unit can set the bypass plate manually to
SUMMER/W INTER or AUTOMATIC mode
In summer mode the bypass plate is activated
During the automatic mode, the plate works according to outside temperature. Set value 15...20c
The automatic mode has adjustment amplitude of approx 2 hours
CO2 transmitter ON/OFF switching. Setting of CO2 upper limit. Set value 250...1500ppm, 50ppm steps
%RH transmitter ON/OFF switching. Setting of RH upper limit. Set value 30...80%, 5% steps
Regulating amplitude 5...20min
Regulation of inlet air afterheating set value 1 5...30c
Set value of intens ification duration 0 and 5...120min. In 0 position different switch
Set value of overpressure duration time (hearth switch) 5...30min
KEYBOARD
1. The push button can be uded to browse menu
upwards and chnage setting values.
2. The push button can be uded to browse menu
upwards and chnage setting values.
3. Function selection and recording switch.
4. Return to previoius or main manu.
12
R
1
4
3
2
Advertisement
