Advertisement
CONDENSING WATER AND FREEZING PREVENTION
When outlet air freezes, the humidity in Ito-exchanger
turns into water, flows down to the condensing basin and
from there, through the hose and water trap, into the
open drain. During very cold weather the water would
freeze into the exchanger unless the anti-freezing
thermostat stops the inlet air impeller for the fusion
period. During severe cold, the inlet air impeller will work
in cycles. Under extreme conditions (humidity /harsh
cold) the Ito-element may freeze over and the anti-freeze
protection series are not able to defrost it. If such a case
occurs, the machine has to be stopped, opened and the
cold flow stopped and the ice given the necessary time
to melt. Check the drainage of condensed water!
""Waste air cold" setting
thermostat can be adjusted through
on the unit's control panel.
of the
freeze protection
the service menu
10
Advertisement
