Advertisement
Mount the sPDS-480ca
Make sure the device is powered OFF before mounting and connecting.
You can rack mount the PDS-480ca or mount it to a vertical or horizontal surface.
In either case, sPDS-480 must be installed in a location that allows air to move freely
around the front and rear of the housing.
Rack Mount
You can mount the sPDS-480ca on a standard EIA-310-compliant rack.
1. Using the included mounting screws, attach one stainless steel handle to each pair
of threaded holes located on either side of the device, just behind the faceplate.
(Use two screws for each bracket.)
2. Each handle has two holes for rack mounting. Mount the device to a rack using
four #10 or #12 machine screws and lock washers.
Surface Mount
A power screwdriver is recommended for surface mounting.
1. Remove the included rack mount handles from their two attached brackets using a
Philips screwdriver. Together with the other two included brackets, you will now
have four brackets for surface mounting.
2. Using two included screws and lock washers for each bracket, attach two
mounting brackets to each side of the device. The portion of each bracket with
four holes should be fl ush with the bottom of the device.
2. Each of the included mounting brackets mount to the surface using 4 screws each.
Mount the device to the surface using 16 screws that are suitable for the mounting
surface.
6
sPDS-480ca
Product Guide
Make sure that there is adequate space
E
to make all connections to the front and
rear of the device. No vents should be facing
down.
Make sure that the device is securely
E
attached and free of excessive vibration.
E
If multiple devices are mounted on a
single rack, leave at least 1 RU, or 1.75
in (44 mm), between each sPDS-480ca.
Also, the rack should be located in an
environment with a controlled climate.
17.0 in
(432 mm)
19.0 in
(483 mm)
sPDS-480ca 24V
Ethernet
Dimensions: Rack Mount Configuration
12.3 in
(312 mm)
10.6 in
(269 mm)
1.8 in
(46 mm)
2.9 in
(74 mm)
18.4 in
(467 mm)
19.0 in
(483 mm)
sPDS-480ca 24V
Ethernet
Dimensions: Surface Mount Configuration
16.4 in
18.0 in
(417 mm)
(457 mm)
1.8 in
3.5 in
(46 mm)
(89 mm)
13.5 in
(343 mm)
10.6 in
(269 mm)
3.0 in
(76 mm)
2.3 in
(58mm)
Advertisement
