Advertisement
Quick Links
Advertisement
Related Manuals for Philips sPDS-480ca
Summary of Contents for Philips sPDS-480ca
- Page 1 Power / data supply for large-scale Ethernet installations...
- Page 2 Power / data supply for large-scale Ethernet installations sPDS-480ca is a power / data supply designed for large-scale Ethernet LED lighting installations using low-voltage fixtures from Philips Color Kinetics. sPDS-480ca includes 7.5 V and 24 V versions to meet the power requirements of different fixtures.
-
Page 3: Included In The Box
UL Class 2 power supply and Safety Environment Dry Location, IP20 1.8 in 3.0 in (46 mm) (76 mm) * KiNET is the Ethernet lighting protocol from Philips Color Kinetics. 2.9 in 2.3 in (74 mm) (58mm) 18.4 in (467 mm) 19.0 in... -
Page 4: Plan The Installation
480 watts of output and automatically accommodates input voltages ranging from 100 VAC to 240 VAC. Onboard controls incorporate automatic fixture discovery, addressing, and testing. sPDS-480ca is available in 7.5 V and 24 V versions to meet the power requirements of different fixtures. - Page 5 Light System tiles on a 7.5 V sPDS-480ca. Manager Each sPDS-480ca connects to line power with a standard IEC inlet and power cable, Ethernet Switch which can be secured using a locking clamp located on the back of the device’s housing.
- Page 6 Surface Mount A power screwdriver is recommended for surface mounting. 1. Remove the included rack mount handles from their two attached brackets using a Philips screwdriver. Together with the other two included brackets, you will now 16.4 in 18.0 in...
- Page 7 Connect the sPDS-480ca to Line Power Connect the IEC power cable to the inlet in the back of the sPDS-480ca. To secure the cord, tighten the locking clamp around the inlet with a Phillips screwdriver. Connect the power cable to line power.
- Page 8 Using the sPDS-480ca On-Board Menu sPDS-480ca has a navigable LCD screen with three menu levels. Menu Level Description NET: IP Address ... Displays device’s current IP address sPDS-480ca 7.5 V MAC Address Displays device’s MAC address Network Displays an estimate of network bandwidth currently...
- Page 9 Changing an IP Address Each sPDS-480ca comes factory-set with a unique IP address. If necessary, you can change a fi xture’s IP address. To ensure that fi xtures function properly, make sure that the IP addresses of all sPDS-480ca devices within a single installation are unique.
- Page 10 Stay On continues running lights even if overheating occurs. To adjust thermal settings: ► 1. Press Select to activate the sPDS-480ca menu. 2. Select Confi gure. 3. Select Thermal Settings. 4. Use the Up and Down buttons to fi nd the desired thermal setting, then press Select.
-
Page 11: Replacing Fuses
Replacing Fuses sPDS-480ca has a fuse for each of its ports, protecting each port from excessive current. Always replace blown fuses with the same rated fuse: Device Number of Fuses Replacement Fuse 5 A, 125 V, 5 x 20 fast blow fuse sPDS-480ca 7.5 V... - Page 12 Tel 888.385.5742 DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in Tel 617.423.9999 the United States and / or other countries. All other brand or product names are trademarks Fax 617.423.9998...