Advertisement
Quick Links
User Manual of Disposable NFC Temperature Data Logger
1. Product Overview
This data logger is mainly used in the field of medicine,vaccine,blood,food and
laboratory,etc. It is especially suitable for high waterproof requirements in the
storage and transportation places of cold chain.
Users can read the data directly through the APP of the mobile phone in the
mode of wireless Near Field Communication (NFC) ,without tearing the plastic bag.
In the case of the logger's battery depleted, the data can also be read through
the mobile phone.
Diagram of the Logger
Dual
adhesive
tape on the back
LED indicator
Start button
Serial number and
the bar code
2.Technical Parameters
Temperature measuring range:-25℃ ~60℃(-13℉ ~140℉)
Temperature accuracy:±0.5℃(±1℉)
APP software download
Advertisement
Related Manuals for Elitech ETAG-1
Summary of Contents for Elitech ETAG-1
- Page 1 User Manual of Disposable NFC Temperature Data Logger 1. Product Overview This data logger is mainly used in the field of medicine,vaccine,blood,food and laboratory,etc. It is especially suitable for high waterproof requirements in the storage and transportation places of cold chain. Users can read the data directly through the APP of the mobile phone in the mode of wireless Near Field Communication (NFC) ,without tearing the plastic bag.
- Page 2 Record capacity: 4000 points(MAX) Resolution:0.1℃(0.1℉) Record interval:1~255 min continuously set Delayed start:1~255 min continuously set Battery:Wide temperature CR2032 lithium manganese battery Battery life: one year under 25 ℃ environment temperature with 15 minutes record interval in cyclic storage mode Size:70mm * 50mm *2.4mm Weight:About 10 grams Start mode:Button start (Press and hold the button for more than 4 seconds) Storage mode:Cyclic storage mode,over-max-record-capacity stop mode...
- Page 3 Fig.3 Fig.4 3.3 Configure the data logger Default parameters have been configured for the logger in the factory. Users can modify the configuration of the parameters according to their own needs before starting the logger to record data. Open software and press the “config” button shown in Fig.5. Fig.5...
- Page 4 Fig.6 As shown in Fig.6, enter the configuration page and set the required information the parameters. Place the back of the mobile phone close to the data logger within 5 centimeters. Remain stationary until the success of writing. The software will scan the data logger automatically and prompt “Whether to write data”.
- Page 5 Fig.8 3.4 Start recording After the data logger has been configured, press and hold the button for more than 4 seconds.When the indicator light flashes continuously and rapidly,the data logger start recording. Working status indicator: Press and release the button,the indicator light flashes once,which indicates the logger has not been started.
- Page 6 4.1 Record The “Record” page displays all the data that has been stored in the database. Users can choose to view a single or multiple data logger. Each record in the record list contains the information of a logger. The name of the record is composed of the storage time, the UID of the logger,the maximum and minimum temperature,the maximum and minimum humidity(for temperature and humidity data logger).
- Page 7 Product:The name of the item being monitored,such as medicine,vaccine,etc. Users can input 16 Chinese characters or 32 English letters to this field. Place of origin: The producing area of the item being monitored Users can input 24 Chinese characters or 48 English letters to this field. Time zone: Time zone for the producing area of the item being monitored Serial No.
- Page 8 Save template: First check the “Template” check box in the top right corner, then click the “Save Config” button to save the template. Read template: First check the “Template” check box in the top right corner, then select the template from the template list in the lower right corner. 4.3 More Click the “more”...
- Page 9 Email address: Email address of the mail recipient Language: Two languages are optional (Simplified Chinese, English). Server: The IP Address and port number though which data is uploaded to the server. File path: The local storage path through which the exported data file is deposited in the mobile phone Date format: Users can choose a variety of time format.
Need help?
Do you have a question about the ETAG-1 and is the answer not in the manual?
Questions and answers