Accessorizing Modules - ABB SACE Emax 2 Series Instructions For Use Manual

Accessorizing modules The Emax 2 circuit-breakers and Ekip trip units can be equipped as indicated in the combination tables on
5 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
page 27.
Various types of modules are available, differing in functionality and in their position on the circuit-breaker.
The modules that can be connected directly to the electronic trip unit are:
Name
Ekip Measuring
Ekip Measuring Pro
Ekip Signalling 4K
NOTE: the Ekip Signalling 4K module is not available for E1.2 circuit-breakers.
The modules available for the terminal box of the circuit-breaker are:
Name
Ekip Supply
Ekip Signalling 2K
Ekip Signalling 3T
Ekip Synchrocheck
Ekip Com Modbus RTU
Ekip Com Profibus DP
Ekip Com DeviceNet™
Ekip Com Modbus TCP
Ekip Com Profinet
Ekip Com EtherNet/IP™
Ekip Com IEC 61850
Ekip Com Hub
Link
The modules external to the circuit-breaker are:
Name
Ekip Multimeter
Ekip Signalling 10K
Ekip Signalling Modbus TCP
The supervision, configuration and reporting functions are, in addition, guaranteed by further modules for
temporary power supply and communication (test modules):
Name
Ekip TT
Ekip T&P
Ekip Programming
Ekip Bluetooth
Other accessories:
Name
Ekip LCD
Rating plug
Toroid S.G.R.
Rc Toroid
External neutral
Ekip AUP
Ekip RTC
Description
Power supply, protection and measurement modules.
Signalling module
Description
Power supply module
Signalling module
Signalling module
Module for measuring voltage and synchronism between two
power sources
Communication module
Communication module
Description
Power supply and measurement module
Signalling module
Remote control and monitoring module
Description
Power supply and test module
Power supply, communication and test module
Power supply, communication and programming module
Power supply and communication module
Description
LCD interface for aggressive environments
Module which defines the rated current In
External homopolar current sensor
External differential current sensor
Current sensor on the external neutral
Connected/isolated position contacts
Contact for signalling circuit-breaker is ready to close
ABB | SACE Emax 2
Introduction to Ekip trip units | 1 - Presentation