PROGRAMMING INSTRUCTIONS
Set Time of Day
Turn the large dial to the TIME position. Press SELECT to select
between hours, minutes, and 12/24 hour mode. Press ADJUST to
scroll to the correct time or adjust between 12/24 mode. 'A.M.' will
not appear on the LCD when in A.M. mode; 'P.M.' will appear on the
LCD when in P.M. mode.
NOTE: In 24 hour mode, calendar is in D/M/Y format instead of
M/D/Y
Set Today's Date and Current Day of the Week
Turn the large dial to the DATE position. Press SELECT keys to select
between day, month and year positions. Press ADJUST keys to scroll
to the current date. The correct day of the week will automatically
show on LCD screen when today's date is adjusted. The EZ Pro
controller is leap year compliant.
Select Zones and Set Their Run Times
A zone run time determines the duration a zone will run. Turn the large
dial to the ZONE/RUN TIME position. Turn PROGRAM dial to choose
program A, B or C. Press SELECT to choose the zone you want for the
selected program (A, B, or C). With the zone number displayed on the
LCD, press ADJUST to adjust the RUN TIME for that zone. RUN TIMES
can be set from 1 minute to 1 hour 59 minutes. Continue selecting zones
and adjusting their run times until you have all the zones you want in the
selected program.
After the last zone and before the first zone, a RUN TIME summation is
provided. This is useful for determining the total run time for a program.
The LCD displays the letters "ALL" and a total RUN TIME is displayed.
The time displayed is a summation of all the RUN TIMES for the selected
program (100% water budget). (ex. A program has a run time of 5
minutes on zone 1; 12 minutes on zone 2; and 6 minutes on zone 4.
The display at this position displays ALL and a run time of 23 minutes).
14
PROGRAMMING INSTRUCTIONS
Set Start Times
A START TIME is the time of day a program will start running.
The EZ Pro
™
Jr. allows three start times per program.
Turn the large dial to the START TIMES position. Press SELECT to
select the start time you want to set (1, 2, or 3). Press ADJUST to set
the time of day the program will start. Repeat as needed. Only one
start time is needed. Multiple start times will repeat the program.
To delete a start time, select the position between 11:59pm and
12:00am. The --:-- will appear indicating.
Start Time Stacking
The EZ Pro
™
Jr. will stack start times if your program watering times
overlap another start time. The additional start time will begin when the
Jr.
™
first cycle finishes.
Set % Water Budget
% WATER BUDGET changes the duration of run times in a program
by the percentage entered 0 - 200% (i.e., a 10 minute run time at 50%
water budget will run 5 minutes). This feature is useful when changes
in weather occur. If it is unusually dry, you may want to extend your
run time for each zone in a program. With % Water Budget, you can
change one number, and all run times in the program are adjusted.
If 24 hours of run time is exceeded 24 hr will flash on the LCD.
Turn the large dial to the % WATER BUDGET position. A % symbol
will appear on the LCD to let you know you are working on the %
Water Budget amount. Press ADJUST to choose the desired
percentage amount.
15
Need help?
Do you have a question about the EZ Pro Jr. 8300 Series and is the answer not in the manual?