Set Odd/Even Day Scheduling Option; Set Interval Scheduling Option; Program Review - Signature Control Systems, Inc. EZ Pro Jr. 8300 Series Installation And Programming Manual

PROGRAMMING INSTRUCTIONS-PROGRAM MODE
NOTE: Programming a WATER DAYS schedule deletes any other
schedule for the selected program.

Set Odd/Even Day Scheduling Option

Turn the large dial to the SCHEDULE position. The last scheduling
option chosen for the current program appears on the LCD. To set
either an ODD or an EVEN schedule press the SELECT button till an
arrow appears on the LCD next to the appropriate schedule (ODD or
EVEN). A DATE must be set for odd/even watering). The SELECT
buttons act as toggle keys and will toggle between odd or even.
NOTE: Programming an ODD/EVEN schedule deletes any other
schedule for the selected program.

Set Interval Scheduling Option

Turn the large dial to the SCHEDULE position. The last scheduling
option chosen for the current program appears on the LCD. Press
SELECT to scroll to the interval days position. An arrow will appear
on the LCD next to INT (Interval). Use the ADJUST to choose interval
days between watering (1-30). The date displayed is day one of the
interval schedule. (Today's date if one has been set). To change day 1
date use SELECT to go to the interval start date position. As needed,
change the date for day one of the interval schedule with ADJUST
(can only be set up to 30 days out).
NOTE: Programming an INTERVAL schedule deletes any other
schedule for the selected program.
18
PROGRAMMING INSTRUCTIONS-PROGRAM MODE
Set Event Days Programming (Optional)
Turn the large dial to the SCHEDULE position. The last scheduling
option chosen for the current program appears on the LCD. Press both
the SELECT '+' and SELECT '–' together. A flashing indicator will appear
next to Event Days on the LCD. Use the ADJUST '+' button to select that
day for watering or press ADJUST '–' for non watering days. A flashing
indicator appears over the day you're about to set. Raindrops appear
over selected days to water. The indicator automatically moves one day
to the right after an ADJUST '+' or '–' key press. Continue selecting or
deselecting the days you want the controller to water until you have
your 7 day calender set.
NOTE: Programming an EVENT DAYS schedule does NOT delete any
other schedule for the selected program.
Repeat the above procedures for each program (A, B, or C),
as you require.
That's it! Your EZ Pro ™ Jr. is now programmed. Turn the MODE dial
to the AUTO position to run the program you entered. Leave the
large dial on TIME and it does not matter where the Program
dial is.

PROGRAM REVIEW

To review the current program, turn the MODE dial to the PROGRAM
position and turn the large dial to the setting you wish to review (i.e.,
turn the large dial to TIME to review the time set for the controller).
When you need to view different zones or run times (1, 2, 3), use the
SELECT buttons only.
NOTE: Since you are in the program mode, the potential exists to
change the program accidentally.
19