Subscribe to Our Youtube Channel
Related Manuals for Sealey SM3002.V2
Summary of Contents for Sealey SM3002.V2
- Page 1 INSTRUCTIONS FOR METAL WORKING LATHE SM3002.V2 Model No: Original Language Version SM3002.V2 Issue: 4 - 13/02/12...
- Page 2 (rcd) is used. It is particularly important to use an rcd with portable products that are plugged into a supply which is not protected by an rccB. If in any doubt consult a qualified electrician. You may obtain a residual current device by contacting your Sealey dealer.
- Page 3 4.1.2. Set the high/low range lever (fig.4.A) to low and the automatic feed lever (fig.5.A) to disengaged - turn anti-clockwise. 4.1.3. confirm that the cross-slide is well clear of the chuck and that all keys, spanners etc. are clear of the machine. fig.3 fig.4 fig.5 Original Language Version SM3002.V2 Issue: 4 - 13/02/12...
- Page 4 DO NOT allow the tool to over-travel and come into contact with the chuck. Always be prepared to hit the emergency stop button if the leadscrew cannot 1.75 1, 4 or 5 be disengaged. Turning 20 fig.8 fig.9 Original Language Version SM3002.V2 Issue: 4 - 13/02/12...
- Page 5 WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. Sole UK Distributor, Sealey Group, www.sealey.co.uk...
Need help?
Do you have a question about the SM3002.V2 and is the answer not in the manual?
Questions and answers