Dell G3 3590 Service Manual page 60

Table 4. System setup options—Boot options menu
Boot options
Advanced Boot Options
Enable UEFI Network Stack
Boot Mode
Boot Mode: UEFI only
Enable Boot Devices
Boot Sequence
BIOS Setup Advanced Mode
UEFI Boot Path Security
Table 5. System setup options—System Configuration menu
System Configuration
Date/Time
Date
Time
Enable SMART Reporting
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Boot Support
Enable External USB Ports
SATA Operation
Drives
M.2 PCIe SSD-0/SATA-2
SATA-0
60 System setup
Enables or disables UEFI Network Stack.
Default: OFF.
Displays the boot mode of this computer.
Enables or disables boot devices for this computer.
Displays the boot sequence.
Enables or disables advanced BIOS settings.
Default: ON.
Enables or disables the system to prompt the user to enter the Admin password when
booting a UEFI boot path from the F12 boot menu.
Default: Always Except Internal HDD.
Sets the computer date in MM/DD/YYYY format. Changes to the date take effect
immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Enables or disables SMART (Self-Monitoring, Analysis, and Reporting Technology)
during computer startup to report hard drive errors.
Default: OFF.
Enables or disables all integrated audio controller.
Default: ON.
Enables or disables microphone.
Default: ON.
Enables or disables internal speaker.
Default: ON.
Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Enables or disables USB ports to be functional in an operating system environment.
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore Technology).
Enables or disables various onboard drives.
Default: ON.
Default: ON.