Steps
1
Align the screw holes on the battery with the screw holes on the palm rest and keyboard assembly.
2
Replace the two screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3
Connect the battery cable to the system board.
Next steps
1
Install the
base
cover.
2
Follow the procedure in
Identifier
Status
Memory modules
Identifier
Status
Removing the memory module
Prerequisite
1
Follow the procedure in
2
Remove the
base
cover.
About this task
The following image indicates the location of the memory module and provides a visual representation of the removal procedure.
16
Removing and installing components
After working inside your
computer.
GUID-2A6DAE1B-1FBE-40F9-8D46-40E8C3FBD267
Released
GUID-D1F7FD84-7CAA-4775-A9B9-B9859B7196DE
Released
Before working inside your
computer.