About this task
The following image indicates the location of the WLAN card and provides a visual representation of the removal procedure.
Steps
1
Remove the screw (M2x3) that secures the WLAN card to the system board.
2
Remove the bracket that secures the WLAN card to the system board.
3
Disconnect the antenna cables from the WLAN card.
4
Slide and remove the WLAN card from the WLAN card slot.
Identifier
Status
Installing the WLAN card
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.
GUID-CC33136C-1B6C-439B-8202-1AAB1DF041DE
Released
Removing and installing components
37