Advanced; Help - Philips 49BDL3005X User Manual

BDL4988XC/49BDL3005X
DisplayPort Ver.
Set the DisplayPort version to 1.1a or 1.2, this setting is only valid on
DisplayPort input and output,
1.1a: Switch DisplayPort Ver. to 1.1a(default), the DisplayPort output is
the clone of DisplayPort input.
1.2: Switch DisplayPort Ver. to 1.2 to support MST(Multi-Stream
Transport)
NOTES:
• If the display shows a black screen or works abnormally under
DisplayPort source, please switch to 1.1a and turn AC off and
on.
• For DP daisy chain application, please select the same DP
version for all PD.
Cooling Fan
Select {On} to turn on the cooling fan permanently. Select {Auto} and
the cooling fan turns on according to display's temperature.
NOTES:
• Select the default {Auto} option, and the cooling fan will start
running if the temperature reaches 45°C (113°F). The cooling
fan will stop running if the temperature reaches 43°C (109°F).
• A temperature warning message will appear on the screen if
the temperature reaches 58°C (136°F). All key functions except
[ ] key will then be disabled.
• Once the temperature reaches 60°C (140°F), the display's
power will be shut down automatically.
Factory settings
Reset the settings to the factory defaults.

5.1.6. Advanced

Picture Jitter clean
Sound EQ boost
Tiling
USB copying
Network
General settings
Advanced

Help

Jitter clean
Turn on/off Jitter cleaning function for HDMI and DVI signal quality
enhancement. The default setting is On.
EQ boost
Adjust digital signal EQ boost.
USB copying
Copy user logo "Welcomelogo.png" to your internal memory .
5.1.7. Help
Picture
Sound
Tiling
Network
General settings
Advanced
Help
28