Mounting On A Wall; Vesa Grid - Philips 49BDL3005X User Manual

BDL4988XC/49BDL3005X
1.4.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that
complied with TUV-GS and /or UL1678 standard in North America.

VESA Grid

1. Spread a protective sheet on a flat surface, which is wrapped around the display when it was packed, beneath the screen surface to facilitate your
operation without scratching the screen.
2. Ensure you have all accessories necessary for all types of mounting (wall-mounting, ceiling mounting, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result in damage to the
equipment, or injury to the user or installer. The product warranty does not cover the damage caused by improper installation.
4. For the wall-mounting kit, use the M6 mounting screws (with a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely.
5. Weight of the unit without base= 21.6 kg. The equipment and its associated mounting facilities still remain secure during the test. Use only the UL
6. listed Wall Mount Bracket with a minimum weight/load of 21.6 kg.
1.4.1. VESA Grid
BDL4988XC/49BDL3005X
Caution:
To prevent the display from falling:
• For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially available. For detailed instructions
about the installation, refer to the guide provided with the bracket
• To prevent the display from falling in case of earthquake or other natural disaster, please consult the manufacturer of the bracket for the mounting
location.
Required space for ventilation
Leave a space of 100 mm at the top, rear, right and left of the display for ventilation.
Table
400(H) x 400(V) mm
Tabletop stand
100 mm
2
Protective Sheet
100 mm
100 mm
100 mm