System Description; Peripheral Equipment; Software For Use With The Device - Ametek DR5200 Supplementary Instructions Manual

SYSTEM DESCRIPTION

2

2.1 Peripheral equipment

You can use the device with the equipment that follows:
• A logic solver that can read 4...20 mA current input and low error alarm signals
• A PC or workstation (this is used only to change parameters)
• A HART
For more data, refer to "Start-up" in the handbook (document [N1]).

2.2 Software for use with the device

You can change device parameters with the software that follows:
• PACTware™
• AMS™ Device Manager
For more data, refer to "Start-up" in the handbook (document [N1]).
7
®
Handheld Controller (this is used only to change parameters)
www.drexelbrook.com
DR5200
DR5200-LM SIL2 Issue 2