Blending With The Pitcher - Ninja BLENDER DUO IV700 Series Owner's Manual

BLENDING WITH THE PITCHER

IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
IMPORTANT: As a safety feature, if the
pitcher and lid are not properly installed,
the timer will display "---" and the motor
will be disabled. If this happens, repeat
step 4. When the pitcher and lid are
properly installed, the program button
LEDs will illuminate, indicating the
appliance is ready to use.
Vacuum blending recommended
for smoothies, soups, dips, frappes, juices,
and protein drinks for brighter flavors,
vibrant colors, and improved textures. To
vacuum blend, press DRINKSAVER. The
unit will vacuum seal for approximately
30 seconds or until the vacuum seal is
achieved. Then press desired program.
NOTE: Vacuum blending is not
recommended for frozen drinks
or ice cream programs.
1 Place the unplugged motor base on
a clean, dry, level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Then plug the
motor base into a wall outlet.
12
ninjakitchen.com
2 Set the pitcher on a level surface and
add ingredients, making sure to not
exceed the MAX LIQUID line. DO NOT
add dairy products past the MAX
DAIRY line.
3 Place the lid on the pitcher, aligning the
triangle symbol located on the lid with the
triangle symbol located on the pitcher's
handle. Press down on both tabs to lock
lid into place. The triangle symbol MUST
be aligned for the lid to lock in place and
the unit to operate.
4 Lower pitcher onto base. Align arrow
on pitcher with arrow on base. Then
rotate the pitcher clockwise until it
clicks into place.
NOTE: The motor base can detect
which container is installed. Only the
functions available for a particular
container will illuminate.
To learn more about the programs that
work with the pitcher, refer to page 11.
5 Press the Power button to turn the
unit on. The available program buttons
will illuminate and the unit will be
ready to use.
6 Select your desired Auto-iQ® or
manual program.
7 When blending is complete, rotate
pitcher counterclockwise to remove
from motor base, then place on a
level surface.
NOTE: If vacuum blending, you
must release the vacuum seal before
removing the pitcher lid (see step 8
on the next page for more information).
ninjakitchen.com
13