Blending With The Single-Serve Blending Cup - Ninja BLENDER DUO IV700 Series Owner's Manual

MAKING JUICE WITH THE PITCHER – CONT�
6 Press the power button to turn the unit
on. Press the JUICE button. First the
unit will vacuum seal for approximately
30 seconds, then it will automatically
switch to the blending program.
7 When program is complete, rotate
the pitcher counterclockwise to
remove from motor base, then place
on a level surface.
8 Before removing lid, first release the
vacuum seal by pulling up on the vauum
release tab on pitcher lid.
16
ninjakitchen.com
9 Remove lid and pour out fresh juice,
leaving Micro-Juice TM Filter inserted
in pitcher.
10 After pouring out all the blended
contents, remove filter.
11 Unplug the unit when finished. To
lift motor base, place your hands
underneath both sides of it and gently
pull the unit up and toward you.

BLENDING WITH THE SINGLE-SERVE BLENDING CUP

IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
Vacuum blending recommended
for extractions, smoothies, soups, dips,
and dressings for brighter flavors, vibrant
colors, and improved textures. To vacuum
blend, press DRINKSAVER. The unit will
vacuum seal for approximately 15 seconds
or until the vacuum seal is achieved. Then
press desired blending program.
NOTE: Vacuum blending is not
recommended for whipped desserts
that benefit from added air and frozen
drinks with highly frozen ingredients.
1 Fill cup with desired contents. DO NOT
add ingredients past the MAX LIQUID
line on cup. DO NOT add dairy products
past the MAX DAIRY line on the cup.
2 Place the Pro Extractor Blades® Assembly
on the top of the cup and turn clockwise
to seal.
NOTE: The motor base can detect which
container is installed. Only the functions
available for a particular container will
illuminate.
To learn more about the programs that
work with the single-serve blending cup,
refer to page 11.
3 Place the unplugged motor base on
a clean,dry, level surface such as a
countertop or table. Press downward
on the motor base to adhere the suction
cups to the work surface. Then plug the
motor base into a wall outlet.
4 Turn the cup upside down and align
vacuum channel to lock symbol on base.
Then turn cup clockwise to lock in place.
Press the Power button to turn unit on.
Vacuum
Channel
5 Select your desired Auto-iQ® or
manual program.
ninjakitchen.com
17