Battery Charging; Charger Leds - Challenge CLMF2031A Original Manual

Operating Instructions & Tips

Battery Charging

12
• Do not use other battery chargers. The battery charger supplied is specifically designed for the
Lithium-Ion battery used in this garden appliance.
• Check the mains voltage! The voltage of the power supply must correspond with the data on
the nameplate of the battery charger. Battery chargers operate on 220-240 V.
The battery is equipped with a temperature monitor that allows charging only within a temperature
range between -5°C and 50°C. This ensures an optimum battery service life.
NOTE! The battery is supplied partially charged. To ensure full capacity of the battery, charge the
battery in the battery charger before using your appliance for the first time. The Lithium Ion battery can
be charged at any time without reducing its service life. Interrupting the charging procedure does not
affect the battery.

Charger LEDs

Preparation: The charging process starts as soon as the mains plug of the battery charger is
plugged into a mains socket and the battery is inserted into the charging compartment.
If the battery is not inserted, a continuous red light indicates that the mains plug is plugged into a
mains socket and the battery charger is ready for operation.
Charging: a flashing green LED on the charger indicates that the battery is charging normally.
Charged: continuous green LED on the charger indicates that the battery is ready for use.
Customer Helpline 0343 515 1906
21