Step 4 - Fitting/Removing The Battery - Challenge CLMF2031A Original Manual

Assembly
Step 4 - Fitting and Removing the Battery
7
Fitting the battery
Lift the battery cover
support rails and locks into position. Close the battery cover.
Removing battery
Stop the machine. Pull out the isolator key. Lift the battery cover, activate the release latch on the
battery and slide the battery out. Close the battery cover.
Grass Full Indicator
8
Your mower may be fitted with a grass full indicator. This is a small red flap on the top side of the
grass collector.
When this flap remains open as you work, it means that the grass collector is not full (air flowing
freely through the grass collector).
When this flap remains closed it means that the grass collector is full and needs to be emptied (no
airflow through the grass collector)
16
, slide the battery into the battery chamber. Ensure it slides smoothly along the
11
Customer Helpline 0343 515 1906
11