Advertisement
Quick Links
Advertisement
Related Manuals for Challenge ME1030M
Summary of Contents for Challenge ME1030M
- Page 1 1000W Electric Rotary Mower (Model: ME1030M) Instruction Manual...
- Page 6 Important! When using equipment, a few safety precautions must be observed to avoid injuries and damage. 1. ► Read the operating instructions carefully and comply with them. It is important to consult these instructions in order to acquaint yourself with the unit, its proper use and safety regulations. 2.
- Page 7 bolts may only be replaced in full. 14. ► Damaged parts on the mower must be replaced by trained personnel. Use only genuine spareparts. 15. ► Follow the instructions to fit or remove the blade and wear protective gloves. 16. ► Check the site on which you intend to use the lawn mower and remove all objects that may be caught and thrown up by the mower.
- Page 8 29. ► Extension cables must comply to H07RN-F requirements as described in DIN 57 282/VDE 0282 and must have a minimum cross-section of 1.5 mm . The plug must have an earth contact and the connection must be splashproof. Before use check the lead for signs of damage and ageing.
- Page 9 manufacturer’s instructions. Make sure that your feet always a safe distance away from the mower blade! Do not start the motor if you are positioned in front of the chute. 41. ► Do not touch the cutting blade until the machine has been disconnected from the mains and the cutting blade has reached a complete standstill.
- Page 10 CAUTION! Read all safety regulations and instructions. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and serious injury. Keep all safety regulations and instructions in a safe place for future use. - Do not use the lawnmower if the cords are damaged or worn.
- Page 11 3. Layout (Fig. 1 / 2) 1. Switch on/off lever 2. Cable strain-relief clamp 3. Switch box 4. Top push handle 5. Bottom handle support 6. Grass deflector 7. Grass box 7a. Grass box housing halves 8. housing 9. Cable clips 10.
- Page 12 6. Before starting the equipment The lawn mower is delivered unassembled. The complete push handle and the grass collector must be assembled before using the lawn mower. Follow the instructions step-by-step and use the pictures provided as a visual guide to easily assemble the machine.
- Page 13 and/or damaged blades. To carry out this check, first switch off the motor and pull out the power plug. The cutting height is adjusted as shown in Figs. 6a and 6b. To do this turn the hub cap clockwise to release the axle (Fig. 6a) and remove the hub cap with the screw and tire.
- Page 14 the motor before you remove these items. The safety distance between the blade casing and the user provided by the guide struts must be maintained at all times. Take special care when mowing and changing direction on embankments and slopes. Ensure that you have a secure surface to stand on, wear shoes with anti-slip soles that offer good grip, and long trousers.
- Page 15 motor has been switched off. Never attempt to stop the blade. Check regularly that the blade is correctly secured, in good condition and well ground. If not, grind or replace the blade. If the moving blade strikes an object, stop the mower and wait until the blade has come to a complete standstill.
- Page 16 compressed air at low pressure. ● We recommend that you clean the device immediately each time you have finished using it. ● Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment.
- Page 17 8.5 Ordering replacement parts: Please quote the following data when ordering replacement parts: ● Type of machine ● Article number of the machine ● Identification number of the machine ● Replacement part number of the part required 9. Disposal and recycling The unit is supplied in packaging to prevent its being damaged in transit.
- Page 18 Argos Cat No. : 7305258 Supplier Model No.: ME1030M Product Description: Lawn mower Complies with the requirement of the following directives: 2006/42/EC ----Machinery Directive 2006/95/EC ----Low Voltage Directive 2004/108/EC ----EMC Directive Test Lab Name: TÜV Product Service Ltd. Jiangsu Address: 10 Huaxia Road(M), Dongting, Wuxi, 214100, Jiangsu, P.R.C Number (Lab code for CE license): 0123 Technical documentation holder: Suzhou Cleva Electric Appliance Co.,Ltd.
- Page 19 After sales helpline number: 08456 400 800 Spare parts purchases: www.argosspares.co.uk...
Need help?
Do you have a question about the ME1030M and is the answer not in the manual?
Questions and answers