Replacements; Replacement Of Evaporator Motor And Fan; Replacement Of Condenser Motor And Fan - Maersk Container Industry Star Cool SCI-20 Operating And Service Manual

72 of 112 pages

19. Replacements

19.1 Replacement of evaporator motor and fan

Note: Turn off main power supply for unit before replacing evaporator motor and fan.
Note: Due to high aerodynamic requirements (decreased energy consumption) beware of
sharp edges is located in this area!
Disconnect the power supply to the motor by removing the motor cover and unscrew the earth wire
placed directly on the motor. Do not disconnect the other cable connection which is connected
directly in the motor cover. Remove the 4 x M6 bolts that hold the evaporator motor bracket, incl.
motor and fan. Then the evaporator motor bracket with motor and fan can slide right through the
inspection opening of the unit, by dragging it towards yourself.
Replace the defective parts and reinstall the evaporator fan module. Prior to mounting the motor
cover, check the sealing for any damages. If damaged, the sealing must be replaced.
19.2 Replacement of condensor motor and fan
Note: Turn off main power supply for unit before replacing condenser motor and fan.
Remove the condenser grille and disconnect the power supply to the motor by removing the motor
cover and unscrew the earth wire, which is placed directly on the motor. Do not disconnect the
other cable connection which is connected directly in the motor cover. Replace the defective parts
and reinstall the parts. Prior to mounting the motor cover, check the sealing for any damages, if
damaged the sealing must be replaced.
Operating and service manual