Fidelis Network Series Quick Start Manual page 5

DB Network
The DB Network allows communication between Collector Controller and Controller XA nodes. This
network must be independent from other networks. IPv4 addressing only.
Appliance
Collector Controller 10G
Collector XA4
SYNC Network
The SYNC Network provides transport for database node synchronization. This network must be
independent from other networks. Only IPv4 addresses are supported.
Appliance
Collector Controller 10G
Collector XA4
ILO / IPMI Network
Optional network for remote/out-of-band server administration.
Appliance
Collector Controller 10G
Collector XA4
5. Appliance — Logical Network Configuration
Each physical connection must be assigned logical network information. Build a table of the logical
information for each appliance (sample below) that you can reference during configuration. You will
refer to this table multiple times during setup. Appendix A has a worksheet you may use.
©Fidelis Cybersecurity
Switch Port Type
10GbE Fiber SR, LC connector (may require SFP+ transceiver)
10GbE Fiber SR, LC connector (may require SFP+ transceiver)
Switch Port Type
n/a
10GbE Fiber SR, LC connector (may require SFP+ transceiver)
Switch Port Type
GbE - Copper Cat5 RJ45 port
GbE - Copper Cat5 RJ45 port
5
QUICK START GUIDE
Fidelis Network™ High Capacity Collector
www.fidelissecurity.com
Qty.
1
1
Qty.
1
Qty.
1
1