Metz SCA 3302 M7 User Manual page 40

the flashgun is in flash mode "Remote-SLAVE".
• Detach the flashgun from the camera - once
removed, the flashgun can now be used as a sla-
ve flashgun.
• Open out the camera flash
• Trigger a test flash on the camera, the slave flas-
hgun should respond with a delayed flash
• The setup is now ready for use
Important: When the slave flashgun is switched
It is possible to deactivate the remote function:
a) by switching off the flashgun
b) by connecting it with the camera - deselecting
"WIRELESS" on the camera and activating the
camera by touching the camera's release button
Setting procedure with the mecablitz 76MZ-5
digital
• Equip flashgun with adapter
• Attach flashgun with adapter to the camera
• Switch on flashgun and set to "TTL"
• Switch on camera and set to "WIRELESS"
• To set the remote address (if not already pro-
grammed beforehand):
• Press the "Sel" key twice on the mecablitz and
use the
40
off it loses the remote function and
has to be switched back into remote
mode by connecting it with the came-
ra.
keys to select "REMOTE".