Metz SCA 3302 M7 User Manual page 33

mination of the subject, while the slave (meca-
blitz) takes over the remaining two-thirds
(automatically controlled light output "Ratio").
2. Controller: A Minolta flash unit 5400xi /
5400HS / 3600HS(D) / 5600HS(D):
Not possible with Dimage 7i, 7Hi!
2.1 The controller does not contribute to the expo-
sure but only controls the slave (mecablitz)
which illuminates the subject on its own.
2.2 The controller contributes one-third of the illu-
mination of the subject while the slave (meca-
blitz) takes over the remaining two-thirds
(automatically controlled light output "Ratio").
3. Controller: The Minolta Wireless Remote Flash
Controller
Not possible with Dimage 7i, 7Hi!
3.1 The controller only controls the slave. The slave
(mecablitz) illuminates the subject on its own.
3.2 The controller controls two slaves (mecablitz).
One slave contributes one-third of the illumina-
tion, the second slave the remaining two-thirds
(automatically controlled light output "Ratio").
Please refer to the corresponding Minolta oper-
ating instructions (camera, flash unit or remote
flash controller) for the controller setting proce-
dure.
Setting the slave mode on the mecablitz
44 MZ-2, 54 MZ-..., 70 MZ-... and 76 MZ-5 digi:
Initialisation:
Attach the SCA 3302 adapter to the mecablitz (or
33