Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ACTi C11W
Summary of Contents for ACTi C11W
- Page 1 Wireless Cube Camera Hardware Manual C11W Ver. 2016/01/08...
-
Page 2: Table Of Contents
Connecting Audio Output Device (optional)......... 11 Installing the Memory Card (optional)........... 11 Installing the Camera Mounting the Bracket ..............13 Mounting the Camera ..............13 Adjusting the Viewing Angle and Focus ........14 Connecting for the First Time Accessing the Camera www.acti.com... -
Page 3: Precautions
Every reasonable care has been taken during the writing of this manual. Please inform your local office if you find any inaccuracies or omissions. We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice. www.acti.com... - Page 4 This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022 and EN 55024. In a domestic environment, this product may cause radio interference in which cause the user may be required to take adequate measures. www.acti.com...
-
Page 5: Safety Instructions
Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition. www.acti.com... -
Page 6: Introduction
Hardware Manual Introduction List of Models This hardware manual contains the following models: C11W 1.3MP Wireless Cube with Basic WDR, Fixed lens www.acti.com... -
Page 7: Package Contents
Hardware Manual Package Contents Camera Antenna Power Adapter Bracket Mounting Screws Quick Installation Guide Warranty Card www.acti.com... -
Page 8: Physical Description
Flashing LED: Camera is connected to the network via Ethernet. Audio Output Connects to audio output devices, such as a speaker, etc. Built-in Microphone Receives audio input. Memory Card Slot Insert a memory card into this slot for local recording purposes. NOTE: Supports microSDHC only. www.acti.com... - Page 9 1. Power off the camera. 2. Press and hold the RESET button as you power on the camera. 3. Continuously press the RESET button until the Amber LED lights up which will normally take about 30 seconds to complete. www.acti.com...
-
Page 10: Basic Connections
1. Screw the antenna to the antenna jack. 2. Turn the antenna to its vertical position. Connecting to Power Connect one end of the bundled power adapter to the camera DC 12V jack and the other end to a power outlet. www.acti.com... -
Page 11: Connecting To A Wired Network
Connecting Audio Output Device (optional) If necessary, connect the audio out device jack to the audio out port of the camera. Installing the Memory Card (optional) 1. Insert the memory card with the metal contacts facing the back of the camera. www.acti.com... - Page 12 Hardware Manual 2. Push the card until it clicks into place. NOTE: Supports microSDHC cards only. www.acti.com...
-
Page 13: Installing The Camera
Attach the bracket to the wall using the three (3) supplied screws. Mounting the Camera 1. Attach the camera to the bracket and tighten the knob. 2. Adjust the tilt angle and tighten the knob to fix the camera position. www.acti.com... -
Page 14: Adjusting The Viewing Angle And Focus
2. Tighten the knob to fix the camera position. 3. The camera comes with a pre-fixed focus applicable for most environments. If there is a need make adjustments when viewing the camera Live View, turn the lens left or right to adjust the focus. www.acti.com... -
Page 15: Connecting For The First Time
2. Plug the Ethernet cable to the camera. 3. Plug the other end of the Ethernet cable to one of the LAN ports on the router. 4. In Windows system, click Network and double-click on the camera model to open the Web Configurator page. www.acti.com... - Page 16 Password: 123456 NOTE: Install ActiveX Control for video streaming management when prompted in Internet Explorer. 6. After login, the Live View page is displayed. Click the SETUP icon. 7. From the SETUP menu, click IP Settings > WiFi. www.acti.com...
- Page 17 Disconnect the Ethernet cable from the camera. Wireless setup is complete. e. Access the camera via wireless network connection. See Accessing the Camera on page 20. NOTE: For more detailed information, refer to the Firmware Manual downloadable from www.acti.com. www.acti.com...
- Page 18 Normally, wireless networks are encrypted for security and depending on the encryption type, may require WEP or WPA key. Enter the passcode on the space provided. NOTE: Refer to the camera Firmware Manual for more detailed description of the wireless network settings. www.acti.com...
- Page 19 Disconnect the Ethernet cable from the camera. Wireless setup is complete. g. Access the camera via wireless network connection. See Accessing the Camera on page 20. NOTE: For more detailed information, refer to the Firmware Manual downloadable from www.acti.com. www.acti.com...
- Page 20 – by using IP Utility. The IP Utility is a light software tool that can not only discover the cameras, but also list lots of valuable information, such as IP and MAC addresses, serial numbers, firmware versions, etc., and allows quick configuration of multiple devices at the same time. www.acti.com...
- Page 21 Hardware Manual Search and downloand the latest IP Utility from http://www.acti.com/DownloadCenter. Upon launching of IP Utility, an instant report will be shown as follows: You can quickly notice the camera model in the list. Click on the IP address to automatically launch the default browser of the PC with the IP address of the target camera filled in the address bar of the browser already.
- Page 22 Copyright © 2016, ACTi Corporation All Rights Reserved 7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, Taipei, Taiwan 114, R.O.C. TEL : +886-2-2656-2588 FAX : +886-2-2656-2599 Email: sales@acti.com...