Preparations; For Using A Computer; Basic Network Settings - Sony BKMW-E3000 Operation Manual

Preparations

For Using a Computer

Install e-VTR Manager on a computer meeting the
following requirements.
e-VTR Manager may not perform normally if installed on
a computer that does not meet these requirements.
CPU: 1 GHz or higher
Memory: 256 MB or greater
OS: Windows XP/2000
DirectX 8.1lb or higher
Language: English
Available hard disk space: 5 MB or more
Monitor resolution: XGA (1024 × 768) or more
recommended

Basic Network Settings

Use the VTR maintenance menu to make basic network
settings.
Use the following procedure to set the IP address, subnet
mask, and default gateway.
VTR control panel
CHANNEL
CTL/TC
CONDITION
TC
HOME F1 F2 F3
HOME button
HOME page of function menu
1
On the VTR control panel, display the HOME page of
the function menu.
2
With the HOME button pressed, press the F5 (MENU)
button to open the MAINTENANCE MODE page.
MULTI
CONTROL
PUSH/
SHIFT
ALARM
KEY INHI
MENU
RESET
F4 F5 F6
F5(MENU) button
MULTI CONTROL knob
3
Rotate the MULTI CONTROL knob to bring the
cursor (*) to M5: NETWORK and press the F5 (SET)
button.
MAINTENANCE MODE
M0 : CHECK
M1 : ADJUST
M2 : ERROR LOGGER
M3 : OTHERS
M4 : SETUP MAINTENANCE
M5 : NETWORK
The M5: NETWORK page appears.
4
Rotate the MULTI CONTROL knob to bring the
cursor to M50: IP ADDRESS and press the F5 (SET)
button.
M5 : NETWORK
M50 : IP ADDRESS
M51 : SUBNET MASK
M52 : DEFAULT GATEWAY
M55 : TAPE LEADER CONFIG
M56 : IP CONFIG
M57 : OTHERS CONFIG
M58 : M50-M52 RENEW
M59 : RESET ALL USER
The M50: IP ADDRESS setting page appears.
5
Enter a new value or change the present value.
M5 : NETWORK
M50 : IP ADDRESS
192. 168. 0. 123
9
Preparations