Installation Procedure - LG EC93 Series Owner's Manual

14

INSTALLATION PROCEDURE

NOTE
Image shown may differ from your TV.
y
Your TV's OSD (On Screen Display) may differ slightly from that shown in
y
this manual.
The available menus and options may differ from the input source or product
y
model that you are using.
New features may be added to this TV in the future.
y
The TV can be placed in standby mode in order to reduce the power
y
consumption. And the TV should be turned off if it will not be watched for
some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of
y
brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Connect an external device to the TV set.
3 Make sure the network connection is available.
You can use the TV network functions only when the network connection is
made.
* If the TV is turned on for the first time after it was shipped from the factory,
initialization of the TV may take a few minutes.