Ec Declaration Of Conformity; Safety Information - Siemens SINUMERIK 840Di sl/840D sl Function Manual

Eps network services
Table of Contents

Advertisement

08/2008

EC declaration of conformity

The EC Declaration of Conformity for the EMC Directive can be found on the
Internet at:
or under the Order No. 15257461 or at the relevant branch office of the A&D MC
Division of Siemens AG.

Safety information

This manual contains notices you have to observe in order to ensure your per-
sonal safety, as well as to prevent damage to property. Notices referring to your
personal safety are highlighted in the manual by a safety alert symbol; notices re-
ferring to property damage only have no safety alert symbol. Depending on the
hazard level, warnings are indicated in a descending order as follows:
!
Danger
Indicates that death or serious injury will result if proper precautions are not
taken.
!
Warning
Indicates that death or serious injury may result if proper precautions are not
taken.
!
Caution
(With warning triangle) indicates that slight personal injury may result if proper
precautions are not taken.
Caution
(Without warning triangle) indicates that property damage may result if proper
precautions are not taken.
Notice
Indicates that an unwanted result or situation may result if the appropriate advice
is not taken into account.
In the event of a number of levels of danger prevailing simultaneously, the warn-
ing corresponding to the highest level of danger is always used. A notice warning
of injury to persons with a warning symbol may also include a warning relating to
property damage.
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 08/2008
http://support.automation.siemens.com
Preface
v

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840di/840d

Table of Contents